RC Buggy Kit Losi 22SCT 3.0 Race Kit
Losi 22SCT 3.0 Race Kit 1/10 2WD Short Course Truck TLR03009
This is the Losi 22SCT 3.0 Race Kit 2wd 1/10 scale by Team Losi Racing. The Losi 22SCT 3.0 builds on the advances of its predecessor with a host of changes that make it the truck to beat in short course competition. Also, many parts that were considered optional on the 2.0 are now included, so you can build to team spec right out of the box. Many parts included with this kit are upgrades that many racers use on the previous kit.
Adjustable Toe and Anti-Squat
The 22SCT 3.0 rear pivots now fit adjustable inserts for the rear toe and anti-squat adjustments for a quick and easy change to the geometry without the need to buy additional parts. Both adjustable in 0.5-degree increments, the rear toe adjustments range from 2.5 to 4.0 degrees and the rear anti-squat adjustments range from 0.0 to 3.0 degrees.
New Wider Battery Mount
The new, wider 2.5mm aluminum chassis and molded mud guards create a battery mounting pocket which allows shorty- and saddle-style LiPo packs to be mounted transversely across the chassis. Shorty packs can also be mounted in line with the chassis. This allows racers to fine-tune the weight bias of the truck for just about every racing condition imaginable.
During testing, the 3-gear transmission substantially improved speed and rear-end grip for both spec and modified classes. Other benefits included better handling and quicker acceleration. A 4-gear transmission is available separately so drivers can dial in response for any track surface, grip level, or driving style.
Aluminum-Plate Rear Hub
The hub base is molded composite, allowing a bearing to be press fit without play and minimal unsprung weight when compared to an all-aluminum hub. The aluminum plate is secured to the hub with an M3 screw and ball stud, which is vertically adjustable. Now the ball stud is supported by aluminum from pushing or pulling out, while still threading into composite so it cannot work loose.
HDS Slipper with HD Spring
The 22SCT 3.0 includes Heavy Duty Slipper (HDS) pads and 84T HDS spur gears as well as grooved and tapered slipper plates. The biggest improvement comes with the HD slipper spring that offers a wider range of adjustment. It also makes the slipper more consistent.
Lightweight Aluminum Chassis
Made from durable 7075-T6 aluminum, the 22SCT 3.0 chassis includes many strategically milled pockets to reduce weight without compromising strength or chassis flex when landing jumps.
Many of the parts included with this kit are popular upgrades that provide everything needed to build a pro-level short course truck right out of the box. This includes milled, 7075-T6 aluminum parts like the top shaft, adjustable rear pivot mounts, motor plate, rear camber block, bleeder shock caps and ball stud spacers throughout.
TLR Pre-Cut Body
The TLR Hi-Performance body handles great, looks sharp, and is pre-cut to get you on to the track even quicker! (Clear body included in kit)
- Electronic Speed Control
- Radio System
- 48 Pitch Pinion Gear
Type: 2WD Short Course Truck
Length: 21.15 in (537.15mm)
Width: 9.72 in (246.9mm)
Height: 7.28 in (184.9mm)
Ground Clearance: 1.98 in (50.3mm)
Wheelbase: 12.8 in (325mm)
Weight: Varies with Equipment Used
Chassis: 2.5mm, 7075-T6 Aluminum
Suspension: Lower A-Arm, Upper Adjustable Link
Motor or Engine: 540 (not included)
Gear Pitch: 48-pitch
Wheel Size: 3.0/2.2 in (76.2/55.9mm)
Shock Type: 12mm Big Bore, Threaded Aluminum
Body: Clear, pre-cut, polycarbonate
Ball Bearings: Full Ball Bearings
Experience Level: Advanced
Recommended Environment: Indoor/Outdoor
Assembly Time: 5-7 Hours
Is Assembly Required: Yes